The swiss cnc machine belongs to the precision processing equipment, and it can complete the complex machining of vehicle, milling, drilling, boring, carving and carving at the same time. It is mainly used for batch processing of precision hardware and shaft special-shaped non-standard parts.
Because the structure of the walking machine is different from the traditional numerical control lathe, the machining efficiency and machining precision of the walking machine are higher than that of the NC lathe. Take pains with biaxial arrangement of this design tool, greatly saves the processing cycle time, exchange time method and tool to the machine tool by shortening the knife, multi tool station overlap and thread chip effective axial moving overlapping functions, direct spindle indexing function two times during processing, shorten the vacuum time. Chip cutting tool plays a very important role in the machining process of spindle and workpiece clamping parts. It provides a strong guarantee for constant machining accuracy. In the view of the heart machine market, 38mm is its largest processing diameter, which makes the walking machine occupies a great advantage in the precision axis processing market. This series of machine tools can also be equipped with automatic feeding device, which realizes fully automated production of single machine tool, reduces labor cost and bad products in production process, and can be used to produce large quantities of precision shaft parts.
The machining efficiency and machining accuracy than NC lathe has been a qualitative leap, because of the double arrangement tool, greatly reducing the processing cycle time, and time to exchange tool on the machine tool by shortening the knife, multi tool station overlap function, thread cutting effective axial moving overlapping functions, direct spindle indexing function the two time when processing, realize the time shortened. The cutting tool is always machined in the clamping part of the spindle and the workpiece, which ensures the constant precision of the machining accuracy. At present, the maximum machining diameter of the heart machine in the market is 38mm, and it has a great advantage in the precision axis processing market. This series of machine tools can be equipped with automatic feeding device to realize the automatic production of a single machine tool, and reduce the labor cost and the bad rate of product. It is very suitable for mass production of precision shaft parts.
Post time: May-02-2018